SK's Pneumatic & Hydraulic Training Kits
Explore our wide range of Pneumatic & Hydraulic Training kits Models
1)FULLY PNEUMATIC TRAINER KIT
SKMT-01
The kit will consists of following components:-
- Powdered coated Mounting Board which is portable and can be placed on table easily. All pneumatic
- components are mounted on this board.
- Filter Regulator and Lubricator unit mounted with pressure gauge.
- Slide valve connected with FRL unit.
- 4-way connector.
- Double acting cylinders ф32x stroke 175mmx1/8” port size- 2nos.
- Single acting cylinder ф32x80mm stroke 100mm-1no.
- Both side pilot operated 5/2 way DCV-3 nos.
- Single side pilot operated 5/2 way DCV.
- Push button operated 3/2 way DCV.
- Roller operated 3/2 way valve- 4 nos.
- OR valve.
- Quick exhaust valve.
- PU tube-15 mtrs.
- One Flow control valve mounted on cylinder port.
- Silencers and connectors mounted on cylinders and valves.
2) ADVANCE ELECTROPNEUMATIC TRAINER KIT
SKMT-02
The kit will consists of following components:-
- Powder coated Mounting Board which is portable and can be placed on table easily.
- Filter Regulator and Lubricator unit mounted with pressure gauge.
- Slide valve connected with FRL unit.
- 4-way connector.
- Double acting cylinders ф32x stroke 175mmx1/8” port size- 2nos.
- Single acting cylinder ф32x80mm stroke 100mm.
- Both side solenoid operated 5/2 way DCV-2nos.
- Roller operated Limit switches
- Single side solenoid operated 5/2 way DCV.
- OR valve.
- Quick exhaust valve.
- PU tube-15 mtrs.
- One Flow control valve mounted on cylinder port.
- Silencers and connectors mounted on cylinders and valves.
- electric power supply unit 24 V DC ,
- push-button 3reley with NO-NC contact—1no.
- Relay switch board and three relays with terminal board- 1 no.etc.
3) COMBI PNEUMATIC AND ELECTROPNEUMATIC TRAINER KIT
SKMT-03
The kit will consists of following components:-
- Powdered coated Mounting Board which is portable and can be placed on table easily. All pneumatic components are mounted on this board.
- Filter Regulator and Lubricator unit mounted with pressure gauge.
- Slide valve connected with FRL unit.
- 4-way connector.
- Double acting cylinders ф32x stroke 175 mmx1/8” port size- 2nos.
- Single acting cylinder ф32x80mm stroke 100mm.
- Both side solenoid operated 5/2 way DCV-2 nos.
- Roller operated electrical Limit switches.
- Single side solenoid operated 5/2 way DCV.
- Both side pilot operated 5/2 way DCV-3 nos.
- Single side pilot operated 5/2 way DCV.
- Push button operated 3/2 way DCV.
- Roller operated 3/2 way valve- 4 nos.
- OR valve.
- Quick exhaust valve.
- PU tube-15 mtrs.
- One Flow control valve mounted on cylinder port.
- Silencers and connectors mounted on cylinders and valves.
- electric power supply unit 24 V DC ,
- Push-button 3reley with NO-NC contact—1no.
4) MAGIC PNEUMATIC-ELECTROPNEUMATIC-PLC BASED TRAINER KIT
SKMT-06
Magic Pneumatic-Electro-pneumatic-PLC based Trainer Kit is designed to train the students with the concept of fully pneumatic and electro-pneumatically and PLC ladder logic in combination to operated fully pneumatic, electro-pneumatic circuits and circuits based on ladder logic. All the three kind of logic’s can be performed on this kit.
5) ELECTRO HYDRAULIC TRAINER KIT
SKHT-02
Electro Hydraulic Trainer Kit is designed to train the students with the concept of electro-Hydraulic circuits. The kit is designed considering the type of hydraulic systems required in industries to perform various operations. The students can perform various types of circuits like sequential, bleed off, meter in meter out circuits. The kit is designed to clear student’s concept of design of electrical ladder logic circuits to run hydraulic circuits which is real requirement of industries for automation.
Contact
- Plot No. N-29/2, Akola Growth Center, IV Phase, M.I.D.C. Akola -44005
- Tel.: +91 9822641908 , +91 8805595228
- Mail : skindustriesdivison@gmail.com
Marching Towards Excellence